Ground Terminal Connection Point - zabudovaný zemnící terminál pro snadné zemnění externích antén

Podpora standardové duality - k zařízení jsou dostupné dvě řady originálního firmware:

Provozní režimy:

• Access Point Bridging
• Access Point Client
• Gateway
• Wireless Routing Client
• Wireless point to point
• Wireless Bridge Link
• Wireless point to multipoint

Podpora dalších funkcí:

• WDS
• Transparentní Bridge
• LAN-to-LAN Bridge
• monitoring asociovaných klientů s hodotami síly signálu a realné přenosové rychlosti
• DFS (Dynamic Frequency Selection)
• TPC (Transmit Power Control)
• Podpora nastavení Long-Range Parameter (ACK/CTS modulace pro vytváření spojů na dlouhé vzdálenosti)

Vlastnosti:

• Přenosová rychlost: 128/54 Mbps / 11 Mbps
• Enkrypce: 64/128/152-bit WEP, WPA2 & WDS
• Bezpečnost dle 802.1x: EAP-TLS, EAP-TTLS, EAP-PEAP, PEAP-MSCHAPv2, MAC filtr
• Správa: Web management, SNMP v1 a v2
• Anténa: integrovaná 5GHz 13dB, R-SMA konektor pro připojení externí antény
• Atheros eXtended Range technologie
• 300MHz, 32MB SDRAM, 4MB Flash
• zvýšený rozsah napájení (10-24V), vestavěný zemnící člen
• jednotka osazena HighPower miniPCI (23dBm / 200mW - regulace výkonu po 1dB krocích)
• miniPCI s podporou SuperA/TurboA (propustnost až 108Mbps)
• integrovaná dual-polarization anténa (13dBi pro pásmo 802.11a)
• podpora Power-over-Ethernet (integrovaný pasivní PoE extraktor 12-24V dle 802.11af)
• podpora enkrypce 64/128-bit WEP, TKIP, AES, IEEE802.1x autentifikace
• podpora Multiple SSID s VLAN segmentací
• certifikace pro ČR a SK trh "CE (!)"
• podpora alternativních linuxových OS: OpenWRT, DD-WRT
• pokročilé: Syslog, Telnet/SSH, SNMP trap, STP, WDS2, Bandw.Control, DHCP relay, QOS

Součásti dodávky: instalační příslušenství k montáži na stožár, zdroj 24V, POE injektor

TECHNICAL SPECIFICATIONS - SYSTEM INFORMATION

• Processing Specifications Atheros AR7130/300MHz
• Memory Size 32MB DDR SDRAM
• NOR Flash 4MB ( up to 16MB max)
• NAND Flash Optional ( From 32MB to 128 MB max)
• LAN Interface 1 x 10/100 BASE-T Ethernet Port
• Antenna Integrated directional dual-polarization antenna, 13dBi 5GHz
• Max power consumption 4 Watts(bare board only)
• Power method Passive Power over Ethernet
• Certification FCC, CE Mark
• ROHS Compliant Yes
• Weight 420grams
• Dimension 223 x 123 x 60 (mm)
• Operating Temperature -20oC to 70oC
• RX SPECIFICATIONS - 802.11a - 6Mbps / -95dBm 54Mbps / -72dBm

Firmware Information(11a/b/g Modules)
  Multiple SSID
Supports up to 4 virtual access points (VAP) per radio, with unique BSSIDs. Traffic from each VAP can be tagged with a unique VLAN and channeled down to the Ethernet port. The tagged packets from Ethernet port are then channeled back to the respective VAP with the tag removed. Each VAP will be able to configure their own security (WEP, TKIP, and AES).

Long Range Support
Suitable for long-range wireless deployment with Proprietary Long Distance Algorithm for ACK and CTS timeout adjustment support. Provides recommended values for the parameters and at the same time allow for manual fine-tuning for optimal performance.

Antenna Alignment
Antenna Alignment feature allows the system integrator to align the antenna for best signal strength.

Operating Modes

• Access Points
• Client
• RootAP / Transparent Client
• Repeater
• Wireless Adapter
• Wireless Routing Client
• Gateway

WAN Type

• Static IP
• Dynamic IP
• PPPoE
• PPTP
• L2TP

Device Management

• HTTP / HTTPs Web Server
• SNMP V2c
• Telnet / Secure Shell (SSH)    

  Virtual Access Point (VAP) • Up to 4 SSIDs with unique MAC Addresses (BSSID)

  • 802.1q VLAN tag per VAP bridging with Ethernet
  • Configurable Security (WEP, TKIP, AES, MAC Filtering) per VAP
     

  Advanced Features

  • Built-in DHCP server
  • Transmission Power Control (One dB per step)
  • Closed System (Suppress SSID)
  • Transmission Rate Control
  • Spanning Tree Protocol
     

  OTHER PROMINENT FEATURES - DESCRIPTION

  • Long Range Parameter Settings - Suitable for Long Range wireless deployment with high receiver sensitivity.
  • CPE Point-to-Point (PtP) - Ideal as CPE device connecting PtP with a central AP
  • Power with Passive PoE - Device power from PoE through ethernet cable provide flexible installation.
  • IEEE 802.11h (DFS & TPC) - DFS (On/Off) Ability Enables worldwide operation through support for standards-based Dynamic Frequency Selection (DFS) and Transmission Power Control (TPC)
  • SNMP Trap - SNMP Traps enable an agent to notify the management station of significant events by way of an unsolicited event.
  • Antenna Control(MAIN/AUX/DIVERSITY) - Provides extra redundancy and able to auto-reconfigurable when there are changes in the network topology.
  • Antenna Alignment - Allows user to adjust their external antenna to receive the optimum throughput.
  • DHCP Relay - (Only in Gateway or Wireless Routing Client Mode) Allows DHCP Clients on different subnets to get IP address from central DHCP server.
  • Remote Upgrade of Firmware - Allows user to upgrade their firmware through Telnet/SSH
  • Parallel Bandwidth - (Only in Routing Mode) Provide scalable Internet bandwidth with Load Balancing and Fail-Over Redundancy.
  • RIP 1 / 2 - (Only in Gateway or Wireless Routing Client Mode) Routing Information Protocol Version 1 / 2
  • 5GHz, 13dBi Antenna Specifications:
  • Gain 13dBi
  • Radiation Directional
  • Frequency Range 5.45-5.85 GHz
  • Polarization Dual – Polarization
  • Horizontal -3dB Beamwidth 30 degrees
  • Vertical -3dB Beamwidth 20 degrees
  • Front-to-Back Ratio >25 dB
  • VWSR ?1.15:1
  • Return Loss ?14dB
  • Point to Point Isolation ?12dB